Ask the user to enter a number for red, green, and blue components of an RGB value, which takes a certain amount of red, green, and blue colors and produces a new color. Test the numbers that are input by the user and check that each value is between 0 and 255 (inclusive). If a color's value is outside of this range, print which color's number is not correct (e. g., "Red number is not correct" if the red value is 300). Multiple colors may be out of range. The order of the colors should be the same as the sample runs below; red, then green, then blue.

Jace needs to answer a question on square roots to win a quiz. how can he use a spreadsheet to find the square root of 786? a. use the functions round and count b. create a table and chart c. use the function sqrt d. use the function now

Write a program in plp assembly that counts up by one starting from zero (or one) inside a loop and writes this value to the leds every time the value is increased. the memory address of the leds is 0xf0200000. the table below shows the meaning and an example usage of the instructions covered in the video, plp instructions for project 1. instruction example usage meaning load immediate li $t0, 8 register $t0 is set to the value, 8. store word sw $t2, 0($t1) the value in register $t1 is used as the memory address. the value in register $t2 is copied into this memory address. add addiu $t4, $t3, 29 register $t4 is assigned the sum of 29 and the value in register $t3. jump j your_label_name the program jumps to the line following the label, "your_label_name: ". label your label name: defines a label called "your_label_name: " that can be jumped to

Companies that implement and apply an information system effectively can create