Chapter 8: Discuss how you might organize switch ports with VLANs given various situations. Give a scenario, such as a building with multiple floors or a campus network with multiple buildings. How would multiple switches play into their design strategy

In which phase does software coding and testing happen in the spiral model? the spiral model does not have a separate testing phase. both, software coding and testing occurs during the phase.

You need to design a circuit that implements the functions in the following table: s0 s1 function0 0 a + 10 1 a – b1 0 a + b1 1 a – 1s0 and s1 are 1-bit control inputs to select the function of the circuit. inputs a and b are 4-bitnumbers in 2s complement form. the output is also a 4-bit number in 2s complement form. you are allowed to use only one ttl 7483 4-bit adder to implement all the functions. but anynumber of other components (except the adder) can be used. hint: design a combinational logic circuit to modify the input b and the “carry input” of theadder depending on the control inputs s0 and s1.important: lab grade will depend on the working of the circuit & will be checked of by your labinstructor.1. is the output valid for the following input combinations: a. s0 = 0, s1 = 0, a = 7, b = 3? b. s0 = 0, s1 = 1, a = 7, b = 3? c. s0 = 1, s1 = 0, a = -4, b = -5? d. s0 = 1, s1 = 1, a = -8, b = 6? 2. what is the range of inputs (for both a and b) that will produce the valid output for all the functions?

The volume v and paper surface area a of a conical paper cup are given by where r is the radius of the base of the cone and h is the height of the cone. a. by eliminating h, obtain the expression for a as a function of r and v. b. create a user-de ned function that accepts r as the only argument and computes a for a given value of v. declare v to be global within the function. c. for v ! 10 in.3 , use the function with the fminbnd function to compute the value of r that minimizes the area a. what is the corresponding value of the height h? investigate the sensitivity of the solution by plotting v versus r. how much can r vary about its optimal value before the area increases 10 percent above its minimum value?