Guys, if I'm going back to 505 and it's a 7-hour flight or a 45-minute drive how do I get to 505?

4.11 painting a wall (1) prompt the user to input integers for a wall's height and width. calculate and output the wall's area (integer). note that in this case there is a new line after each prompt. (submit for 1 point). enter wall height (feet): 11 enter wall width (feet): 15 wall area: 165 square feet (2) extend to also calculate and output the amount of paint in gallons needed to paint the wall (floating point). assume a gallon of paint covers 350 square feet. store this value in a variable. output the amount of paint needed using the %f conversion specifier. (submit for 2 points, so 3 points total). enter wall height (feet): 11 enter wall width (feet): 15 wall area: 165 square feet paint needed: 0.471429 gallons (3) extend to also calculate and output the number of 1 gallon cans needed to paint the wall. hint: use a math function to round up to the nearest gallon. (submit for 2 points, so 5 points total). enter wall height (feet): 11 enter wall width (feet): 15 wall area: 165 square feet paint needed: 0.471429 gallons

Usually, when we sniff packets, we are only interested certain types of packets. we can do that by setting filters in sniffing. scapy’s filter use the bpf (berkeley packet filter) syntax; you can find the bpf manual from the internet. set the following filters and demonstrate your sniffer program again (each filter should be set separately): (a) capture only the icmp packet. (b) capture any tcp packet that comes from a particular ip and with a destination port number 23. (c) capture packets comes from or to go to a particular subnet. you can pick any subnet, such as 128.230.0.0/16; you should not pick the subnet that your vm is attached to.

Consider a byte-addressable computer with 16mb of main memory, a cache capable of storing a total of 64kb of data and block size of 32 bytes. (a) how many bits in the memory address? (b) how many blocks are in the cache? (c) specify the format of the memory address, including names and sizes, when the cache is: 1. direct-mapped 2. 4-way set associative 3. fully associative