. Realiza una infografía tomando como referencia la información de “Creative Commons”.

1. so if i wanted to build a linux server for web services(apache) with 1cpu and 2 gb of memory.-operating at 75% of memory capacity2. a windows server with 2 cpu/ 4gb memory- operating at 85% of memory capacity3. a storage server with 1 cpu/ 2gb memory- operating at 85% of memory capacityhow much memory do i have to add for each server. so that the utilization rate for both cpu and memory is at a baseline of 60%."the details for the cpu like its processor or the memory's speed isnt to be concerned" yeah i kept asking my teacher if he's even sure about the but the whole class seems to be confused and the project is due in 3 days..this is a virtualization project where i have to virtualize a typical server into an exsi hypervisor.

1. before plugging in a new device to a computer you should unplug all other devices turn off the computer turn on the computer 2. many of the maintenance tools for a computer can be found in the control panel under administrative tools display personalization

Write a program in plp assembly that counts up by one starting from zero (or one) inside a loop and writes this value to the leds every time the value is increased. the memory address of the leds is 0xf0200000. the table below shows the meaning and an example usage of the instructions covered in the video, plp instructions for project 1. instruction example usage meaning load immediate li $t0, 8 register $t0 is set to the value, 8. store word sw $t2, 0($t1) the value in register $t1 is used as the memory address. the value in register $t2 is copied into this memory address. add addiu $t4, $t3, 29 register $t4 is assigned the sum of 29 and the value in register $t3. jump j your_label_name the program jumps to the line following the label, "your_label_name: ". label your label name: defines a label called "your_label_name: " that can be jumped to