Computers and Technology, 28.05.2021 17:10, skylarhorse8068

You recently connected two Catalyst 2960 access-layer switches, SwitchA and SwitchB, and an external router to your network. Now you need to use the external router for a router-on-a-stick configuration for inter-VLAN routing between VLANs 2 and 4. Both VLANs are already configured on SwitchA and SwitchB and have interfaces assigned to the respective VLANs. Complete the following tasks: Configure GigabitEthernet 0/1 on SwitchA and GigabitEthernet 0/1 on SwitchB as trunk ports. Configure FastEthernet 0/24 on SwitchA as a trunk port. Configure the following on the external router: Enable FastEthernet 0/1 For VLAN 2, configure the following subinterface details: Subinterface: FastEthernet 0/1.2 Encapsulation: 802.1q IP address and subnet mask: 192.168.2.1 255.255.255.0 For VLAN 4, configure the following subinterface details: Subinterface: FastEthernet 0/1.4 Encapsulation: 802.1q IP address and subnet mask: 192.168.4.1 255.255.255.0 Save your changes to the startup-config file on each device.

Answers: 2

Show answers

Other questions on the subject: Computers and Technology

Computers and Technology, 23.06.2019 01:20, sosick90501

Write a function balancechemical to balance chemical reactions by solving a linear set of equations. the inputs arguments are: reagents: symbols of reagents in string row array products: symbols of products in string row array elements: elements in the reaction in string row array elcmpreag: elemental composition of reactants in two dimensional numeric array elcmpprdcts: elemental composition of prducts in two dimensional numeric array hint: the first part of the problem is setting up the set of linear equations that should be solve. the second part of the problem is to find the integers from the solution. one way to do this is to mulitiply the rational basis for the nullspace by increasing larger integers until both the left-and right-side integers exist. for example, for the reaction that involves reacting with to produce and : reagents=["ch4", "o2"]; products =["co2", "h2o"]; elements =["c","h", "o"] elcmpreag=[1,4,0;

Answers: 3

continue

Computers and Technology, 23.06.2019 14:00, savannnab1890

Select the correct answer. andre was recently hired by an organization to check for system vulnerabilities. he is supposed to exploit these vulnerabilities and create a report on the extent of damage to which the system was susceptible. what position does andre hold in this organization? a. information security analyst b. information assurance manager c. penetration tester d. network security engineer e. chief information security officer

Answers: 2

continue

Computers and Technology, 23.06.2019 15:20, headshotplayzcod

In a game with three frames, where will the objects on layer 1 appear? a. next to the play area b. in the middle of the game c. behind everything else d. in front of everything else

Answers: 1

continue

Computers and Technology, 24.06.2019 03:00, firenation18

Click the "draw structure" button to activate the drawing utility. draw two diastereomers of (1z,4r)−1,4−dimethylcyclodecene and name them, including (e)/(z) and (r)/(s) notation. part 1 out of 4 draw the diastereomer containing a chiral center with s configuration here. window open

Answers: 1

continue

Do you know the correct answer?

You recently connected two Catalyst 2960 access-layer switches, SwitchA and SwitchB, and an external...