Using PythonAnywhere, write a program that meets the following criteria: 1. Use an appropriate data structure to read in at least 10 integers from the user.
2. Perform a variety of mathematical operations on the numbers, and print the results of the
following:
i. All the prime numbers
ii. The greatest common divisor between the first and second number
ili. Square of the 3rd number
iv. Square root of the 8th number
v. The absolute value of the 10th number
vi. Ask the user to input a decimal, round it to 2 decimal places, and then overwrite the 4th number
in the list.

Write a program in plp assembly that counts up by one starting from zero (or one) inside a loop and writes this value to the leds every time the value is increased. the memory address of the leds is 0xf0200000. the table below shows the meaning and an example usage of the instructions covered in the video, plp instructions for project 1. instruction example usage meaning load immediate li $t0, 8 register $t0 is set to the value, 8. store word sw $t2, 0($t1) the value in register $t1 is used as the memory address. the value in register $t2 is copied into this memory address. add addiu $t4, $t3, 29 register $t4 is assigned the sum of 29 and the value in register $t3. jump j your_label_name the program jumps to the line following the label, "your_label_name: ". label your label name: defines a label called "your_label_name: " that can be jumped to