Do the same exercise but this time use the value returning function. Here is the skeleton of the main function. Write functions definition according to the function call. Note: Do not change the main(). Copy it as it is. Must define the function after the main(). Make sure you write the function prototype before main(). // function prototype.

Write a function named printfloatrepresentation(float number) that will print the floating point representation of a number using the format given below. (sign bit) exponent in binary (assumed bit).significandfor example if the number passed an argument is 71 yourprogram should print (0) 10000101 (1).00011100000000000000000similarl y if the number passed to the function as argument is -71 the program should print (1) 10000101 (1).00011100000000000000000

Asequential circuit contains a register of four flip-flops. initially a binary number n (0000 ≤ n ≤ 1100) is stored in the flip-flops. after a single clock pulse is applied to the circuit, the register should contain n + 0011. in other words, the function of the sequential circuit is to add 3 to the contents of a 4-bit register. design and implement this circuit using j-k flip-flops.

Write a program that uses a random number generator to generate a two digit positive integer and allows the user to perform one or more of the following operations: a. double the number. b. reverse the digits of the number. c. raise the number to the power of 2, 3, or 4. d. sum the digits of the number. e. if the number is a two-digit number, then raise the first digit to the power of the second digit. f. if the number is a three-digit number and the last digit is less than or equal to 4, then raise the first two digits to the power of the last digit. after performing an operation if the number is less than 10, add 10 to the number. also, after each operation determine if the number is prime. each successive operation should be performed on the number generated by the last operation. your program should not contain any global variables and each of these operations must be implemented by a separate function. also, your program should be menu driven. 7. (fraction calculator) write a program that