Assume a single standard three stage (load, execute, write back) functional unit. Also assume that the execution (stage 2) of multiplication requires 3 units of time, subtraction requires 2 units of time, and addition requires 1 unit of time. Stages 1 and 3 require 1 unit of time. If the computer can perform instruction level parallelism, then how many units of time are there when an instruction is stalled in stage 1? A stall is when an instruction has ENTERED and COMPLETED stage 1, but is not able to leave stage 1 because stage 2 is occupied. Do NOT count the 1 unit of time that an instruction spends in stage 1 while the operands are loaded.
type function2(type a, type b, type c, type d){
type var1 = a - b;
type var2 = var1 * c;
type var3 = a + d;
return var3;
}

Write a computer program to calculate the three-phase fault current for a fault at f in figure 1.16, with the network normal, and with one line at a time removedproblems 1.1 write a computer program to calculate the three-phase fault current for a fault at f in figure 1.16, with the network normal, and with one line at a time removed 20 power system relaying from service. the positive-sequence impedance data are given in the accompanying table. use the commonly made assumption that all prefault resistance values are (1.0+j0.0) pu, and neglect all resistance values. calculate the contribution to the fault flowing through the cb b and the voltage at that bus. for each calculated case, consider the two possibilities: cb b2 closed or open. the latter is known as the stub-end fault í• figure 1.16 problem 1.1 system data for figure 1.16 from to positive sequence 0.0+j0.1 0.05j0.15 0.04 j0.2 0.01 jo. i 0.015 + j0.15 0.01 j0.19 0.01 +j0.19 0.03+j0.1 0.0+j0.08 6 6 6 from service. the positive-sequence impedance data are given in the accompanying table. use the commonly made assumption that all prefault resistance values are (1.0 + j 0.0) pu, and neglect all resistance values. calculate the contribution to the fault flowing through the cb b1, and the voltage at that bus. for each calculated case, consider the two possibilities: cb b2 closed or open. the latter is known as the “stub-end” fault.

The next button in the review section shows the next available comment. next slide with no comment. previous comment. edited comment.

Examine the list below. which factors positively affect lifetime income? check all that apply.