Which element specifies the keywords of the document?
A. semantic
B. head
C. meta
D. text​

Check my work the microprocessor is a(n) circuit, which is designed to process data based on a set of instructions. most desktop and laptop devices contain a microprocessor based on the standard. most tablets and smartphones contain processors based on technology. a microprocessor's circuitry is designed to perform a limited number of tasks contained in its set. during processing, an instruction is loaded into the processor's unit. data is loaded into registers in the processor's where arithmetic and logic operations are performed. microprocessor performance can be measured by its speed. other factors affecting overall processing performance include word size, cache size, and instruction set complexity. most digital devices contain only one microprocessor chip, but today's multi- processors contain circuitry that supports parallel processing. computers contain various kinds of memory. random memory is a special holding area for data, program instructions, and the system. it stores data on a temporary basis until the processor makes a data request. ram is different from disk storage because it is , which means that it can hold data only when the computer power is turned on. computers also contain read- memory, which is a type of non-volatile memory that provides a set of "hard-wired" instructions, called the loader, that a computer uses to boot up.

Me with this program in c++ ! computers represent color by combining sub-colors red, green, and blue (rgb). each sub-color's value can range from 0 to 255. thus (255, 0, 0) is bright red. (130, 0, 130) is a medium purple. (0, 0, 0) is black, (255, 255, 255) is white, and (40, 40, 40) is a dark gray. (130, 50, 130) is a faded purple, due to the (50, 50, 50) gray part. (in other word, equal amounts of red, green, blue yield gray).given values for red, green, and blue, remove the gray part. ex: if the input is 130 50 130, the output is: 80 0 80. thus, find the smallest value, and then subtract it from all three values, thus removing the gray.

Acomputer has a two-level cache. suppose that 60% of the memory references hit on the first level cache, 35% hit on the second level, and 5% miss. the access times are 5 nsec, 15 nsec, and 60 nsec, respectively, where the times for the level 2 cache and memory start counting at the moment it is known that they are needed (e. g., a level 2 cache access does not even start until the level 1 cache miss occurs). what is the average access time?