Drag each label to the correct location on the image. Match the description to its color model.

This model consists of the
constituent primary colors
from the light spectrum.

This model is commonly used
in the printing industry.

In this model subtractive colors
are produced by reflected light.

This model uses subtractive
color mixing.

This model represents colors
in devices that use light as a
medium.

This model uses additive
color mixing.

boxes: RGB, CMYK

i need this asap! 20 points!

:you areto design the controller for alight that functions both as an ordinary light and also as a motion activated light and alarm. a. if the manual switch s is on, then the light l is on. b. besides the manual switch, there is a motion detector, m1, which activatesthis light. c.if motion is detected but the light is on anyway because s is on, only then a secondoutput a, an alarm, is turned on. d. the disable switch, d, disables the motion activated light and alarmbut leaves manual control operation of the light using switch s.(i)read the problem statement and clearly identify the inputs and outputs for the circuit you are designing. (ii)create the truth table for this system; include the light, alarm, switch, disable, and the motion sensor.(iii)draw a schematic of this system.

What is the biggest difference between section breaks and regular page breaks

The ieee 802.11: defines standards for wireless local area network (wlan) communication protocols. identifies various computers or devices connected to a network. verifies any resource attached to another computer on a network that is different from the computer to which the user is logged on. connects multiple local area networks (lans) and wide area networks (wans).