Select the correct answer from each drop-down menu. Terrance is trying to find the correct setting for his photograph, so he uses a light meter. Which type of metering is he using?
Terrance is taking a photograph of a subject in a room with a window. He decides to use his new light meter. First, he performs
metering by aiming the meter at the key light source, a softbox to the subject’s right. Next, he aims the meter toward the window to measure the reflected light. This type of metering is metering.

A
incident
reflective
deflective

B
incident
reflective
incandescent

Given a link with a maximum transmission rate of 32.8 mbps. only two computers, x and y, wish to transmit starting at time t = 0 seconds. computer x sends filex (4 mib) and computer y sends filey (244 kib), both starting at time t = 0. statistical multiplexing is used, with details as follows packet payload size = 1000 bytes packet header size = 24 bytes (overhead) ignore processing and queueing delays assume partial packets (packets consisting of less than 1000 bytes of data) are padded so that they are the same size as full packets. assume continuous alternating-packet transmission. computer x gets the transmission medium first. at what time (t = ? ) would filey finish transmitting? give answer in milliseconds, without units, and round to one decimal places (e. g. for an answer of 0.013777 seconds you would enter "13.8" without the quotes)

Click the "draw structure" button to activate the drawing utility. draw two diastereomers of (1z,4r)−1,4−dimethylcyclodecene and name them, including (e)/(z) and (r)/(s) notation. part 1 out of 4 draw the diastereomer containing a chiral center with s configuration here. window open

Jason typically uses the internet to buy various items. it the total cost of all of the items ordered, at one time, is $250 or more, then the shipping and handling is free, otherwise the shipping and handling is $15 per item. design an algorithm that prompts jason to enter the number of items ordered and the price of each item. (remember cost = number of items order times price) the algorithm then outputs the total billing amount including shipping and handling. your algorithm must use a loop (repetition structure) to get the number and price of each item. write this in algorithm format not program code format.