During the TCP 3-way handshaking process, each side of the communication randomly generates a sequence number, and then sends that random value in a message with the SYN flag turned on. If the sequence numbers were NOT randomly generated and each side had used sequence number 0 to start communication, what potential pitfalls would you expect

Following are the solution to this question:

Explanation:

The handshake TCP 3-way is working as follows:

In TCP, both parties monitor what they sent from a data packet. It turns out it was an overall byte count of all of the sent. Its recipient may be using the hash value of the opposite user to recognize the receipts, however, TCP is a bi-directional data protocol, that requires both sides to also be able to correctly send data. Its parties involved must create the ISN, but the data packet does not start at 0, and that both sides must accept the ISN of all the other party. It ISN starts with such a random supply voltage (immediate Sequence Number) because TCP is two-way communication, all sides can "talk" but must thus produce an ISN as the starting data packet randomly. Throughout the exchange, both parties must notify another party about ISN which they have started.

When a malicious attacker can not randomly select and configure the hash value appropriately, a TCP-session (that can be secure links to a business, shop, or some other commercial business) could be hijacked. That device has to count every byte of a stream sent for the initial random data packet. It could the network users in just three communications agree from each control message value.

A specific field of series and the identification number is contained for each section. During the first SYN sent to the server, the client selects the original hash value (ISN). The ACK database will add it to the proposed ISN or forward that on the SYN to a client to suggest its ISN (ACKs should remind the sender always of the next planned byte). For instance, whenever the number used for the previous link is the same, the ISN of a Client could be rejected, but that's not taken into consideration.

Its client's ACK typically acknowledges the ISN mostly on the server which maintains contact between these sides, as defined by the acknowledgment sector of the server, ISN + 1 mostly on the server. Realize that perhaps the three-way handshake does not send some information. This should be kept till a link is formed. Its 3-way handshake was its universal process for just a TCP connexion to still be opened. Oddly, the RFC doesn't insist on which communications start that way, particularly when setting certain scale reliability in the Header field (three additional controlling bits are accessible besides SYN and ACK and FIN) because TCP assumes that certain control bits would be used during the connexion establishment and release, but others mostly during transferring data, a great deal of damage could be caused by merely messing up the six scale reliability with crazy variations, especially SYN / ACK / FIN which needs, uses, and completes a link concurrently.

it would be a. excessive network collisions or d. slow connectivity between devices those would be my answer.