Computers and Technology, 10.10.2020 21:01, mary9776

Assignment: Create a program that can try out every possible logical combination of the variables A, B, and C, and determine which combinations will yield a true statement. A few things to take note of, first there are eight different possible combinations of the three variables. Make certain you test all eight of the combinations. The code itself will account for 50pts. Include the combinations of A, B, and C that cause the statement to be true for an additional 50pts. (1) (A and B) or (A and C)

(2) (A and C) and (B and !C)

(3) (A or B) and !(B or C)

(4) (A or (B and C)) and (!C and !B)

(5) ((B and C) or (C and A)) and (!(A or B) and C)

Please read each of the five carefully and make sure your code accurately reproduces the logical statement given for each problem. Note that the exclamation symbol indicates the logical "NOT" operator, and the parentheses indicate which order the statements are to be performed in. Keep in mind since you’re testing all possible combinations of input for all five logical statements, you’ll have forty answers generated by your program, in total.

Answer must be in C++

Answers: 1

Show answers

Other questions on the subject: Computers and Technology

Computers and Technology, 22.06.2019 15:00, misslux

This is not a factor that you should use to determine the content of your presentation. your audience your goals your purpose your technology

Answers: 1

continue

Computers and Technology, 23.06.2019 17:30, Annlee23

When making changes to optimize part of a processor, it is often the case that speeding up one type of instruction comes at the cost of slowing down something else. for example, if we put in a complicated fast floating-point unit, that takes space, and something might have to be moved farther away from the middle to accommodate it, adding an extra cycle in delay to reach that unit. the basic amdahl's law equation does not take into account this trade-off. a. if the new fast floating-point unit speeds up floating-point operations by, on average, 2ă—, and floating-point operations take 20% of the original program's execution time, what is the overall speedup (ignoring the penalty to any other instructions)? b. now assume that speeding up the floating-point unit slowed down data cache accesses, resulting in a 1.5ă— slowdown (or 2/3 speedup). data cache accesses consume 10% of the execution time. what is the overall speedup now? c. after implementing the new floating-point operations, what percentage of execution time is spent on floating-point operations? what percentage is spent on data cache accesses?

Answers: 2

continue

Computers and Technology, 24.06.2019 00:50, anthonycraig0205

3. what is the output of the following statements? temporary object1; temporary object2("rectangle", 8.5, 5); temporary object3("circle", 6, 0); temporary object4("cylinder", 6, 3.5); cout < < fixed < < showpoint < < setprecision(2); object1.print(); object2.print(); object3.print(); object4.print(); object1.set("sphere", 4.5, 0); object1.print();

Answers: 1

continue

Computers and Technology, 24.06.2019 01:00, cheycheybabygirl01

How can the temperature of a room be raised by 5degreesf?

Answers: 1

continue

Do you know the correct answer?

Assignment: Create a program that can try out every possible logical combination of the variables A,...