Computers and Technology

Pharmacy(patient_id, patient_name, address, (Rx_num, trademark_name, generic_name, (filldate, num_refills_left), num_refills)) Functional Dependencies: • patient_id ⟶ patient_name, address • patient_id, Rx_num ⟶ trademark_name, generic_name • Rx_num ⟶ num_refills • Rx_num, filldate ⟶ num_refills_left a) Is this relation in 1NF? If not, write an explanation of why it isn’t, then make the necessary changes to fix it. b) Is this relation in 2NF? If not, write an explanation of why it isn’t, then make the necessary changes to fix it. c) Is this relation in 3NF? If not, write an explanation of why it isn’t, then make the necessary changes to fix it.

answer
Answers: 3

Other questions on the subject: Computers and Technology

image
Computers and Technology, 22.06.2019 12:20, crodriguez87
Usually, when we sniff packets, we are only interested certain types of packets. we can do that by setting filters in sniffing. scapy’s filter use the bpf (berkeley packet filter) syntax; you can find the bpf manual from the internet. set the following filters and demonstrate your sniffer program again (each filter should be set separately): (a) capture only the icmp packet. (b) capture any tcp packet that comes from a particular ip and with a destination port number 23. (c) capture packets comes from or to go to a particular subnet. you can pick any subnet, such as 128.230.0.0/16; you should not pick the subnet that your vm is attached to.
Answers: 3
image
Computers and Technology, 24.06.2019 00:40, sierravick123owr441
Use a software program or a graphing utility with matrix capabilities to solve the system of linear equations using an inverse matrix. x1 + 2x2 − x3 + 3x4 − x5 = 6 x1 − 3x2 + x3 + 2x4 − x5 = −6 2x1 + x2 + x3 − 3x4 + x5 = 3 x1 − x2 + 2x3 + x4 − x5 = −3 2x1 + x2 − x3 + 2x4 + x5 = 5
Answers: 3
image
Computers and Technology, 24.06.2019 11:00, asiaosterling
The program below has been generalized to read a user's input value for hourlywage. run the program. notice the user's input value of 10 is used. modify that input value, and run again. generalize the program to get user input values for workhoursperweek and workweeksperyear (change those variables' initializations to 0). run the program. monthsperyear will never change, so define that variable as final. use the standard for naming final variables. ex: final int max_length
Answers: 2
image
Computers and Technology, 24.06.2019 11:20, isabelperez063
Every telecommunication setup uses two devices: one device to transmit data and one device to receive data. which device transmits frequencies to mobile phones? towers transmit frequencies to mobile phones.
Answers: 1
Do you know the correct answer?
Pharmacy(patient_id, patient_name, address, (Rx_num, trademark_name, generic_name, (filldate, num_re...

Questions in other subjects: