During the process of Refrigerant Recovery, the Technician should operate the recovery unit until the system pressure has been reduced to a vacuum, then . A. Immediately close the valve in the service lines and remove the lines from the vehicle

B. Immediately close the valve in the service line and charge the system

C. *Recover to a vacuum of 4 inches of mercury, isolate the system and wait 5 minutes to see that the system holds the vaccum

D. Open the shut­off valves which must be located within 4 inches of the service ends

List a few alternative options and input and output over the standerd keyboard and monitor. explain their functioning in details.

You need to design a circuit that implements the functions in the following table: s0 s1 function0 0 a + 10 1 a – b1 0 a + b1 1 a – 1s0 and s1 are 1-bit control inputs to select the function of the circuit. inputs a and b are 4-bitnumbers in 2s complement form. the output is also a 4-bit number in 2s complement form. you are allowed to use only one ttl 7483 4-bit adder to implement all the functions. but anynumber of other components (except the adder) can be used. hint: design a combinational logic circuit to modify the input b and the “carry input” of theadder depending on the control inputs s0 and s1.important: lab grade will depend on the working of the circuit & will be checked of by your labinstructor.1. is the output valid for the following input combinations: a. s0 = 0, s1 = 0, a = 7, b = 3? b. s0 = 0, s1 = 1, a = 7, b = 3? c. s0 = 1, s1 = 0, a = -4, b = -5? d. s0 = 1, s1 = 1, a = -8, b = 6? 2. what is the range of inputs (for both a and b) that will produce the valid output for all the functions?

Suppose you have 9 coins and one of them is heavier than others. other 8 coins weight equally. you are also given a balance. develop and algorithm to determine the heavy coin using only two measurements with the of the balance. clearly write your algorithm in the form of a pseudocode using the similar notation that we have used in the class to represent sorting algorithms