Scenario2: Now suppose the LAN must support both voice and data and you must choose one of these multiple access strategies in order to support both applications on the same network, with the understanding that voice calls are more important than data. Which would you choose and why? How would voice and data be sent in this scenario? That is, which access protocol would you use, or adapt/modify, and why?

Write a computer program to calculate the three-phase fault current for a fault at f in figure 1.16, with the network normal, and with one line at a time removedproblems 1.1 write a computer program to calculate the three-phase fault current for a fault at f in figure 1.16, with the network normal, and with one line at a time removed 20 power system relaying from service. the positive-sequence impedance data are given in the accompanying table. use the commonly made assumption that all prefault resistance values are (1.0+j0.0) pu, and neglect all resistance values. calculate the contribution to the fault flowing through the cb b and the voltage at that bus. for each calculated case, consider the two possibilities: cb b2 closed or open. the latter is known as the stub-end fault í• figure 1.16 problem 1.1 system data for figure 1.16 from to positive sequence 0.0+j0.1 0.05j0.15 0.04 j0.2 0.01 jo. i 0.015 + j0.15 0.01 j0.19 0.01 +j0.19 0.03+j0.1 0.0+j0.08 6 6 6 from service. the positive-sequence impedance data are given in the accompanying table. use the commonly made assumption that all prefault resistance values are (1.0 + j 0.0) pu, and neglect all resistance values. calculate the contribution to the fault flowing through the cb b1, and the voltage at that bus. for each calculated case, consider the two possibilities: cb b2 closed or open. the latter is known as the “stub-end” fault.

You will be given two character arrays of the same size, one will contain a number of ships. ships will move around the character array based on which way they are facing and the route they are on. routes are given in the other array. the route consists of '-' and '|' for straight paths, '\' and '/' for curves, and '+' for intersections. there are ships on these routes. ships always face a direction, '^' for up, '> ' for right, 'v' for down, and '< ' for left. any time the ships hit a '\' or a '/' it will turn as you would expect a ship to turn (e. g. a '^' that moves into a '/' will turn right). at an intersection, ships will always continue straight through. all ships move at the same speed, ships take turns moving and all ships move during one 'tick'. the one in the most top left goes first, followed by those to its right, then the ones in the next row. it iterates along the rows and then down the columns. each ship moves one space on its turn moving along the route. your function needs to return the position of the first collision between two ships and the number of ticks before the crash occurred.

Consider the simple 3-station assembly line illustrated below, where the 2 machines at station 1 are parallel, i. e., the product only needs to go through one of the 2 machines before proceeding to station 2.what is the throughput time of this process?