Pls Help You have just finished designing a multimedia presentation, and you need to determine whether or not it will be effective. You have decided to do a test run of the presentation with some of your coworkers, after which you will hand out a list of questions for them to answer. The way in which they answer these questions will tell you whether or not your presentation has been effective. What are three questions you would ask, and why would you ask them? What would you learn about your presentation by asking these questions?

Why would a programmer use the logical operator and in an if statement? a: when an action is to be taken that requires both conditions to be falseb: when an action is to be taken that requires both conditions to be truec: when an action is to be taken that requires the first condition to be falsed: when an action is to be taken that requires the second condition to be truei took the test and the answer is b.

In my email i got a message it says a quick message and in message details on who its from its says nicole and under nicole is 50e0bf08e5b671@ualwgypg91wa5wl. uzo9kbud3qjwddygd5.vng -

:you areto design the controller for alight that functions both as an ordinary light and also as a motion activated light and alarm. a. if the manual switch s is on, then the light l is on. b. besides the manual switch, there is a motion detector, m1, which activatesthis light. c.if motion is detected but the light is on anyway because s is on, only then a secondoutput a, an alarm, is turned on. d. the disable switch, d, disables the motion activated light and alarmbut leaves manual control operation of the light using switch s.(i)read the problem statement and clearly identify the inputs and outputs for the circuit you are designing. (ii)create the truth table for this system; include the light, alarm, switch, disable, and the motion sensor.(iii)draw a schematic of this system.