Usually, input device has ability to accept data into the computer while output device then reproduces or display the result of processing. However, many devices combine input and
output capabilities. It can save space and able to perform a variety of functions. Discuss
FIVE (5) examples of combination input and output devices

What must you do before formatting a paragraph?

Usually, when we sniff packets, we are only interested certain types of packets. we can do that by setting filters in sniffing. scapy’s filter use the bpf (berkeley packet filter) syntax; you can find the bpf manual from the internet. set the following filters and demonstrate your sniffer program again (each filter should be set separately): (a) capture only the icmp packet. (b) capture any tcp packet that comes from a particular ip and with a destination port number 23. (c) capture packets comes from or to go to a particular subnet. you can pick any subnet, such as 128.230.0.0/16; you should not pick the subnet that your vm is attached to.

Consider a direct-mapped cache with 216 words in main memory. the cache has 16 blocks of 8 words each. it is a word-addressable computer (rather than a byte-addressable computer which we normally discuss). (a) how many blocks of main memory are there? (b) what is the format of a memory address as seen by the cache, that is, what are the sizes of the tag, cache block, and block offset fields (if they apply)? (c) to which cache block will the memory reference db6316 map?