Suppose two computers (A & B) are directly connected through Ethernet cable. A is sending data to B, Sketch the waveform produced by A when “$” is sent. Also mention the OSI layer that is responsible for this.

The most efficient way to establish top best possible economize position is to measure

Avariable of the data type arrays is storing 10 quantities. what is true about these quantities? a. the quantities all have different characteristics. b. the quantities all have the same characteristics. c. five quantities have the same and five have different characteristics. d. it is necessary for all quantities to be integers. e. it is necessary for all quantities to be characters.

You need to design a circuit that implements the functions in the following table: s0 s1 function0 0 a + 10 1 a – b1 0 a + b1 1 a – 1s0 and s1 are 1-bit control inputs to select the function of the circuit. inputs a and b are 4-bitnumbers in 2s complement form. the output is also a 4-bit number in 2s complement form. you are allowed to use only one ttl 7483 4-bit adder to implement all the functions. but anynumber of other components (except the adder) can be used. hint: design a combinational logic circuit to modify the input b and the “carry input” of theadder depending on the control inputs s0 and s1.important: lab grade will depend on the working of the circuit & will be checked of by your labinstructor.1. is the output valid for the following input combinations: a. s0 = 0, s1 = 0, a = 7, b = 3? b. s0 = 0, s1 = 1, a = 7, b = 3? c. s0 = 1, s1 = 0, a = -4, b = -5? d. s0 = 1, s1 = 1, a = -8, b = 6? 2. what is the range of inputs (for both a and b) that will produce the valid output for all the functions?