Temperature Class Write a Temperature class that will hold a temperature in Fahrenheit and provide methods to get the temperature in Fahrenheit, Celsius, and Kelvin. The class should have the following field: ftemp. A double that holds a Fahrenheit temperature. The class should have the following methods: Constructor. The constructor accepts a Fahrenheit temperature (as a double) and stores it in the ftemp field. setFahrenheit. The setFahrenheit method accepts a Fahrenheit temperature (as a double) and stores it in the ftemp field. getFahrenheit. Returns the value of the ftemp field, as a Fahrenheit temperature (no conversion required). getCelsius. Returns the value of the ftemp field converted to Celsius. getKelvin. Returns the value of the ftemp field converted to Kelvin.

Given a link with a maximum transmission rate of 32.8 mbps. only two computers, x and y, wish to transmit starting at time t = 0 seconds. computer x sends filex (4 mib) and computer y sends filey (244 kib), both starting at time t = 0. statistical multiplexing is used, with details as follows packet payload size = 1000 bytes packet header size = 24 bytes (overhead) ignore processing and queueing delays assume partial packets (packets consisting of less than 1000 bytes of data) are padded so that they are the same size as full packets. assume continuous alternating-packet transmission. computer x gets the transmission medium first. at what time (t = ? ) would filey finish transmitting? give answer in milliseconds, without units, and round to one decimal places (e. g. for an answer of 0.013777 seconds you would enter "13.8" without the quotes)