Simple geometry can compute the height of an object from the object's shadow length and shadow angle using the formula: tangent(angleElevation) = treeHeight / shadowLength. 1. Using simple algebra, rearrange that equation to solve for treeHeight. (Note: Don't forget tangent). 2. Complete the below code to compute treeHeight. For tangent, use the Math. tan() method, described in the "math methods" link above.

Write a program in plp assembly that counts up by one starting from zero (or one) inside a loop and writes this value to the leds every time the value is increased. the memory address of the leds is 0xf0200000. the table below shows the meaning and an example usage of the instructions covered in the video, plp instructions for project 1. instruction example usage meaning load immediate li $t0, 8 register $t0 is set to the value, 8. store word sw $t2, 0($t1) the value in register $t1 is used as the memory address. the value in register $t2 is copied into this memory address. add addiu $t4, $t3, 29 register $t4 is assigned the sum of 29 and the value in register $t3. jump j your_label_name the program jumps to the line following the label, "your_label_name: ". label your label name: defines a label called "your_label_name: " that can be jumped to