A technician has connected a USB printer to a workstation and shared the printer on the local workstation for other users on the network to utilize. The technician successfully printed a test print from the printer’s console and the workstation that the printer is physically connected to. After leaving the customer’s site, the technician received a call from the customer stating no one other than the local user can print to the printer. Each time they attempt to print, they receive an "Access Denied" message.
Which of the following is the most likely reason to the other users cannot print?A. The printer is malfunctioning and requires serviceB. the other users lack sufficient permissions for the shared printerC. the other users need to have the print drivers updated for the printerD. the USB cable is defective and needs to be replaced

Draw the hierarchy chart and design the logic for a program that calculates service charges for hazel's housecleaning service. the program contains housekeeping, detail loop, and end-of-job modules. the main program declares any needed global variables and constants and calls the other modules. the housekeeping module displays a prompt for and accepts a customer's last name. while the user does not enter for the name, the detail loop accepts the number of bathrooms and the number of other rooms to be cleaned. the service charge is computed as $40 plus $15 for each bathroom and $10 for each of the other rooms. the detail loop also displays the service charge and then prompts the user for the next customer's name. the end-of-job module, which executes after the user enters the sentinel value for the name, displays a message that indicates the program is complete.

What is the power dissipated by a resistor with a current of 0.02 a and a resistance of 1,000 ? a. 200 w b. 20 w c. 0.4 w d. 4 w

Why were most movies from the late 1890s until the early 1930s only filmed in black and white? there were only a few people who could afford the technology to produce color motion pictures back then. audiences did not want color motion pictures until later. the film used to make color motion pictures often overheated, which was a safety hazard, so it was generally not allowed. color films had to be hand-colored, frame by frame.