Ansel Adams education and special training

Jenny wants to look at row 345 and compare it to row 17. what can she do if she wanted to easily adjust to see both at once?

Write a modular program (no classes yet, just from what you learned last year), that allows two players to play a game of tic-tac-toe. use a two-dimensional char array with 3 rows and 3 columns as the game board. each element of the array should be initialized with an asterisk (*). the program should display the initial board configuration and then start a loop that does the following: allow player 1 to select a location on the board for an x by entering a row and column number. then redisplay the board with an x replacing the * in the chosen location. if there is no winner yet and the board is not yet full, allow player 2 to select a location on the board for an o by entering a row and column number. then redisplay the board with an o replacing the * in the chosen location. the loop should continue until a player has won or a tie has occurred, then display a message indicating who won, or reporting that a tie occurred. player 1 wins when there are three xs in a row, a column, or a diagonal on the game board. player 2 wins when there are three ox in a row, a column, or a diagonal on the game board. a tie occurs when all of the locations on the board are full, but there is no winner. input validation: only allow legal moves to be entered. the row must be 1, 2, or 3. the column must be 1, 2 3. the (row, column) position entered must currently be empty (i. e., still have an asterisk in it).

:you areto design the controller for alight that functions both as an ordinary light and also as a motion activated light and alarm. a. if the manual switch s is on, then the light l is on. b. besides the manual switch, there is a motion detector, m1, which activatesthis light. c.if motion is detected but the light is on anyway because s is on, only then a secondoutput a, an alarm, is turned on. d. the disable switch, d, disables the motion activated light and alarmbut leaves manual control operation of the light using switch s.(i)read the problem statement and clearly identify the inputs and outputs for the circuit you are designing. (ii)create the truth table for this system; include the light, alarm, switch, disable, and the motion sensor.(iii)draw a schematic of this system.