In step 4 of the CSMA/CA protocol, a station that successfully transmits a frame begins the protocol to transmit a second frame at step 2, rather than step 1.What rationale could justify this procedure over simply transmitting the second frame immediately (if the channel is sensed idle)?

Problems: 1. using textbooks, reference books, and internet as your source of research, draw the following microprocessor microarchitectures i. intel 8086 ii. motorola 68000 i atmel atmega32 iv. mips single cycle v. arm cortex-m3 write an hdl module for a hexadecimal seven-segment display decoder. the input is 4-bit binary representing a hex number (0-f), and the output is 8-bit seven segment display bits (a-h). thus, the decoder must handle the digits 10 - 15 to display a-f respectively, in addition to 0-9 numbers. 2. design a 4-bit left and right rotator (both outputs). first sketch schematic diagrams of your design. then implement your design using hdl coding. 3. 4. design a modified priority encoder that receives an 8-bit input, a7: 0 and produces a 3-bit output, y2o. y indicates the most significant bit of the input that is true. y should be 0 if none of the inputs are true. give a simplified boolean equation, sketch a schematic, and write an hdl code. 5.write an 8: 1 multiplexer module called mux8 with selection inputs s, data input d, and data output y. data input (d) and data output (v) are 32-bit wide

Open this link after reading about ana's situation. complete each sentence using the drop-downs. ana would need a minimum of ato work as a translator. according to job outlook information, the number of jobs for translators willin the future.

An english teacher would like to divide 8 boys and 10 girls into groups, each with the same combination of boys and girls and nobody left out. what is the greatest number of groups that can be formed?