The lengths of the two links are a1 = 3 ft and a2 = 2 ft. The desired position of the endpoint of the two-link robot needs to move from 3i – 4j to 3i + 4j as a straight line.

1. Set the orientation of the robot at start point as a straight line to locate endpoint at 3i – 4j. With this configuration, calculate the angles of θ1 and θ2. In the code listed in the next page, replace the value of theta11 with θ1 and theta21 with θ1. These two angles are the starting points.
2. Calculate the angles of θ1 and θ2 with the second link lies horizontally. Keep in mind that the endpoint of the two-link mechanism must be located at x = 3 ft. In the code listed in the next page, replace the value of theta12 with θ1 and theta22 with θ1. These two angles are the starting points.
3. Use the following code with the calculated results to simulate the angular movement of the two joints. Observe the movement of the endpoint of the mechanism.
4. Determine if the endpoint moves along a straightline.