Computers and Technology

Which data type change will require the app builder to perform the additional steps in order to retain existing functionalities? the app builder needs to change the data types of new custom fields. the app builder is not able to delete and recreate any of the fields, nor modify any apex code.

a. changing the data type of a field used in an apex class from number to text.
b. changing the data type of a field used in a report from a text to an encrypted field
c. changing the data type of a field used as an external id from number to text.
d. changing the data type of a field used in lead conversion from number to text

answer
Answers: 3

Other questions on the subject: Computers and Technology

image
Computers and Technology, 22.06.2019 03:30, raytaylorh010801
Write a computer program to calculate the three-phase fault current for a fault at f in figure 1.16, with the network normal, and with one line at a time removedproblems 1.1 write a computer program to calculate the three-phase fault current for a fault at f in figure 1.16, with the network normal, and with one line at a time removed 20 power system relaying from service. the positive-sequence impedance data are given in the accompanying table. use the commonly made assumption that all prefault resistance values are (1.0+j0.0) pu, and neglect all resistance values. calculate the contribution to the fault flowing through the cb b and the voltage at that bus. for each calculated case, consider the two possibilities: cb b2 closed or open. the latter is known as the stub-end fault í• figure 1.16 problem 1.1 system data for figure 1.16 from to positive sequence 0.0+j0.1 0.05j0.15 0.04 j0.2 0.01 jo. i 0.015 + j0.15 0.01 j0.19 0.01 +j0.19 0.03+j0.1 0.0+j0.08 6 6 6 from service. the positive-sequence impedance data are given in the accompanying table. use the commonly made assumption that all prefault resistance values are (1.0 + j 0.0) pu, and neglect all resistance values. calculate the contribution to the fault flowing through the cb b1, and the voltage at that bus. for each calculated case, consider the two possibilities: cb b2 closed or open. the latter is known as the “stub-end” fault.
Answers: 2
image
Computers and Technology, 22.06.2019 04:30, Lilabbychichi
Ryan is working on the layout of her web page. she needs to figure out where her header, navigation bar, text, and images should go. what technique can her?
Answers: 1
image
Computers and Technology, 22.06.2019 14:20, capo9972
Cengagenowv2 is a comprehensive online learning tool. using cengagenowv2, you may access all of the following except: 2. each time you log in, cengagenowv2 automatically performs a system check and informs you if your computer does not meet the cengagenowv2 system requirements. 3. which tab/page allows you to easily track your assignment scores, number of submissions, time spent, as well as the ability view assign
Answers: 3
image
Computers and Technology, 23.06.2019 15:30, jasssp
Write a program in plp assembly that counts up by one starting from zero (or one) inside a loop and writes this value to the leds every time the value is increased. the memory address of the leds is 0xf0200000. the table below shows the meaning and an example usage of the instructions covered in the video, plp instructions for project 1. instruction example usage meaning load immediate li $t0, 8 register $t0 is set to the value, 8. store word sw $t2, 0($t1) the value in register $t1 is used as the memory address. the value in register $t2 is copied into this memory address. add addiu $t4, $t3, 29 register $t4 is assigned the sum of 29 and the value in register $t3. jump j your_label_name the program jumps to the line following the label, "your_label_name: ". label your label name: defines a label called "your_label_name: " that can be jumped to
Answers: 2
Do you know the correct answer?
Which data type change will require the app builder to perform the additional steps in order to reta...

Questions in other subjects:

Konu
Mathematics, 25.08.2019 09:00