Your branch office is connected to the main office and the internet through the sfo router. you need to configure static routes on the sfo router four each destination. both serial interfaces connecting the sforouter to the main office and the internet have been configured and are up. complete the following tasks:

1. configure a static route to 10.0.0.0/8 network
2. configure a default route to the internet
3. save your changes to the startup-config fileenableshow

answer: internal fragmentation is the difference between the (fixed) size of a memory hole and the data within in that memory. for example, if a 1,024 byte block of memory holds 800 bytes of data, then the 224 bytes difference is considered lost to internal fragmentation.

external fragmentation occurs when the sum of memory fragments is large enough to satisfy a request, but the holes are non-contiguous and the request cannot be satisfied. this can occur when memory is dynamically allocated and freed.

explanation:

dcaddsdewsdesssaqaeddff

  mi: m:

the printer can be used in a both wired and wireless network, only one of the connection methods can be used at one time when the wireless setting is enabled, the wired (ethernet) setting is disabled.

but first you need to

`connect the cord to your computer

`open settings app from the start menu

`click devices

`than click add printer or scanner

and than you should be able to do it from there, if not let me know i can you! : )