Use the rtl design process to create an alarm system that sets a single-bit output "alarm" to ‘1’ when the average temperature of four consecutive samples meets or exceeds a user-defined threshold value. a 32-bit unsigned input "ct" indicates the current temperature, and a 32-bit unsigned input "wt" indicates the warning threshold. samples should be taken once every two clock cycles. a single-bit input "clr" when set to 1 disables the alarm and the sampling process. when "clr" is released, the previous saved temperature samples are cleared to zero. a

Write a program that uses a random number generator to generate a two digit positive integer and allows the user to perform one or more of the following operations: a. double the number. b. reverse the digits of the number. c. raise the number to the power of 2, 3, or 4. d. sum the digits of the number. e. if the number is a two-digit number, then raise the first digit to the power of the second digit. f. if the number is a three-digit number and the last digit is less than or equal to 4, then raise the first two digits to the power of the last digit. after performing an operation if the number is less than 10, add 10 to the number. also, after each operation determine if the number is prime. each successive operation should be performed on the number generated by the last operation. your program should not contain any global variables and each of these operations must be implemented by a separate function. also, your program should be menu driven. 7. (fraction calculator) write a program that