Computers and Technology

Refer to the exhibit. match the network with the correct ip address and prefix that will satisfy the usable host addressing requirements for each network. (not all options are used.) from right to left, network a has 100 hosts connected to the router on the right. the router on the right is connected via a serial link to the router on the left. the serial link represents network d with 2 hosts. the left router connects network b with 50 hosts and network c with 25 hosts.

answer
Answers: 2

Other questions on the subject: Computers and Technology

image
Computers and Technology, 22.06.2019 02:00, sabrinarasull1pe6s61
Which of the following is a way the operating system prevents unknown or unauthorized users from accessing the system?
Answers: 2
image
Computers and Technology, 23.06.2019 09:30, cdavis379
:you areto design the controller for alight that functions both as an ordinary light and also as a motion activated light and alarm. a. if the manual switch s is on, then the light l is on. b. besides the manual switch, there is a motion detector, m1, which activatesthis light. c.if motion is detected but the light is on anyway because s is on, only then a secondoutput a, an alarm, is turned on. d. the disable switch, d, disables the motion activated light and alarmbut leaves manual control operation of the light using switch s.(i)read the problem statement and clearly identify the inputs and outputs for the circuit you are designing. (ii)create the truth table for this system; include the light, alarm, switch, disable, and the motion sensor.(iii)draw a schematic of this system.
Answers: 1
image
Computers and Technology, 23.06.2019 15:20, headshotplayzcod
In a game with three frames, where will the objects on layer 1 appear? a. next to the play area b. in the middle of the game c. behind everything else d. in front of everything else
Answers: 1
image
Computers and Technology, 23.06.2019 19:40, Latoyajenjins1789
Use a physical stopwatch to record the length of time it takes to run the program. calculate the difference obtained by calls to the method system. currenttimemillis() just before the start of the algorithm and just after the end of the algorithm. calculate the difference obtained by calls to the method system. currenttimemillis() at the start of the program and at the end of the program so that the elapsed time includes the display of the result. use the value returned by the method system. currenttimemillis() just after the end of the algorithm as the elapsed time.
Answers: 3
Do you know the correct answer?
Refer to the exhibit. match the network with the correct ip address and prefix that will satisfy the...

Questions in other subjects: