Computers and Technology, 24.10.2019 04:00, Ariannamorales22

An engineer's desktop pc connects to a switch at the main site. a router at the main site connects to each branch office through a serial link, with one small router and switch at each branch. which of the following commands must be configured on the branch office switches, in the listed configuration mode, to allow the engineer to telnet to the branch office switches? (choose three answers.)

a. the ip address command in vlan configuration mode
b. the ip address command in global configuration mode
c. the ip default-gateway command in vlan configuration mode
d. the ip default-gateway command in global configuration mode
e. the password command in console line configuration mode
f. the password command in vty line configuration mode

Answers: 3

Show answers

Other questions on the subject: Computers and Technology

Computers and Technology, 22.06.2019 12:20, crodriguez87

Usually, when we sniff packets, we are only interested certain types of packets. we can do that by setting filters in sniffing. scapy’s filter use the bpf (berkeley packet filter) syntax; you can find the bpf manual from the internet. set the following filters and demonstrate your sniffer program again (each filter should be set separately): (a) capture only the icmp packet. (b) capture any tcp packet that comes from a particular ip and with a destination port number 23. (c) capture packets comes from or to go to a particular subnet. you can pick any subnet, such as 128.230.0.0/16; you should not pick the subnet that your vm is attached to.

Answers: 3

continue

Computers and Technology, 22.06.2019 13:00, cookie1701

Why the bear has a slunky tail determine the meaning of the word slunk in the story

Answers: 1

continue

Computers and Technology, 22.06.2019 23:30, Nason156

What are some ways to use a range name in a formula? check all that apply. in the defined names group, click use in formula, and then select the desired name. begin typing the name in the formula, select a name from the autocomplete list, and use the arrow keys and tab key to enter the name in the formula. begin typing the formula, and then click and drag with the mouse to select the cells to include in the formula. right-click one of the cells in the range. click formula options, and use the dialog box to add the name.

Answers: 1

continue

Computers and Technology, 23.06.2019 18:20, Blossom824

What is wi-fi infrastructure? a metropolitan area network that uses radio signals to transmit and receive data a communications technology aimed at providing high-speed wireless data over metropolitan area networks a means by which portable devices can connect wirelessly to a local area network, using access points that send and receive data via radio waves includes the inner workings of a wi-fi service or utility, including the signal transmitters, towers, or poles and additional equipment required to send out a wi-fi signal

Answers: 2

continue

Do you know the correct answer?

An engineer's desktop pc connects to a switch at the main site. a router at the main site connects t...