1. what tolerances are given for:
(a) angular dimensions?

(b) decimal dimensions?

2. give the body taper specifications.

3. what is the taper per inch for the body?

4. what is the diameter at the small end of the outside taper?

5. determine basic dimension a.

6. give the taper for the hole.

7. what is the taper per inch for the hole?

8. give the diameter at the small end of the inside taper.

9. compute basic dimension b.

10. give the outside thread specifications.

11. what does the lh in the thread note for the shank end specify?

12. what thread class is the 20 threaded nose?

13. what operation is performed on the 2.750 diameter?

14. how is this operation specified?

15. determine the maximum diameter for the reamed hole.

16. give the note for the four holes in the largest diameter.

17. specify the chamfer for the knurled area.

18. specify the angle of chamfer for the 20 threaded nose.

19. how deep is the 20 threaded chamfer?

20. give the original basic length of the tapered body before any change was made.

21. compute the maximum length of dimension c.

22. what matching operation is indicated by the finish symbol

?
23. determine basic dimension d.

24. give the dimensions of the keyseat.

25. determine the basic overall length of the adapter.

26. name three different types of fits.

27. describe briefly the purpose of (a) positive clearance and (b) negative clearance.

28. give the limit dimensions for the .8750 hole.