Asignal has just been received from the wan link on your network. using the given components, which of the following shows the path that the signal would take from the wan to a workstation on your network? assume all components are used at least once and that some components may be used more than once. 1. backbone cabling 2. entrance facility 3. mdf 4. horizontal wiring 5. idf 6. work area

2, 1, 3, 1, 5, 4, 6.

Explanation:

The above written is the correct sequence of the path of the signal that it would take from the WAN to workstation on the network.

When the signal is just received by the network from the WAN first it will  enter the entrance facility form there it will move to the backbone cabling form there to MDF(Main distribution Frame) then back to backbone cabling then the signal will flow to IDF(Intermediate Distribution Frame) then to horizontal wiring from there finally the work area.

solution:

this situation is called an ip conflict.

data from a server is sent in small bits called packets. in an ip conflict, some packets will end up in one computer while some other packets will end up in another computer.

so…overall none of the computers get the data as the original message or picture being sent by the server cannot be retrieved with only half the packets. so it will show up as an error.

thus the final answer is d.

the correct answer is a) her connection with a character

this is correct on edgnuity : )