Which of the following scenarios could be considered "using music from a stock house supply? " (select all that apply.)
a sound technician contacts a& m record company to buy the rights to use a music clip
a sound technician takes a music clip from a jazz band’s album purchased by the movie studio
a sound technician takes a music clip from madonna’s first album from his own collection
a sound technician contacts a& m record company for a better recording of a music clip whose copyright is owned by the movie studio

You wanted to look up information about alzheimer's, but you were unsure if it was spelled "alsheimer's" or "alzheimer's." which advanced search strategy would be useful? a) a boolean search b) using a wild card in your search c) trying different search engines d) doing a search for "alsheimer's not alzheimer's" asap. ill give brainlist.

Given a link with a maximum transmission rate of 32.8 mbps. only two computers, x and y, wish to transmit starting at time t = 0 seconds. computer x sends filex (4 mib) and computer y sends filey (244 kib), both starting at time t = 0. statistical multiplexing is used, with details as follows packet payload size = 1000 bytes packet header size = 24 bytes (overhead) ignore processing and queueing delays assume partial packets (packets consisting of less than 1000 bytes of data) are padded so that they are the same size as full packets. assume continuous alternating-packet transmission. computer x gets the transmission medium first. at what time (t = ? ) would filey finish transmitting? give answer in milliseconds, without units, and round to one decimal places (e. g. for an answer of 0.013777 seconds you would enter "13.8" without the quotes)

Write a program in plp assembly that counts up by one starting from zero (or one) inside a loop and writes this value to the leds every time the value is increased. the memory address of the leds is 0xf0200000. the table below shows the meaning and an example usage of the instructions covered in the video, plp instructions for project 1. instruction example usage meaning load immediate li $t0, 8 register $t0 is set to the value, 8. store word sw $t2, 0($t1) the value in register $t1 is used as the memory address. the value in register $t2 is copied into this memory address. add addiu $t4, $t3, 29 register $t4 is assigned the sum of 29 and the value in register $t3. jump j your_label_name the program jumps to the line following the label, "your_label_name: ". label your label name: defines a label called "your_label_name: " that can be jumped to