After placing her insertion point after grandma’s kitchen, order the steps danica needs to follow to insert and format the registered symbol. step 1: click the insert tab. select the registered symbol. click the superscript button. click the registered symbol. navigate to the insert a symbol button.

Knowing that the central portion of link bd has a uniform cross sectional area of 800 mm2 , determine the magnitude of the load p for which the normal stress in link bd is 50 mpa. (hint: link bd is a two-force member.) ans: p = 62.7 kn

In which view can you see speaker notes?

7. design a circuit with three inputs (x, y, and z) representing the bits in a binary number, and three outputs (a, b, and c) also representing bits in a binary number. when the input is 1, 2, or 3, the binary output should be one lesser than the input. when the input is 4, 5, or 6, the binary output should be one greater than the input. when the input is 0, the output is 0, and when the input is 7, the output is 7. show your truth table, all computations for simplification, and the final circuit.