Users complain that they lost connectivity to all resources in the network. a network administrator suspects the presence of a bridging loop as a root cause of the problem. which two actions will determine the existence of the bridging loop? (choose two.)
confirm mac port security is enabled on all access switches.
check the port utilization on devices and look for abnormal values.
verify that the management vlan is properly configured on all root bridges.
capture the traffic on the saturated link and verify if duplicate packets are seen.
ensure that the root guard and loop guard are properly configured on all distribution links.

The reset circuit used on the four 3-bit counters analyzed in this activity reset the counts to zero (000). it makes sense for the up-counters to start at zero (000), but the down-counters should start at seven (111). what would you need to change so that the 3-bit binary down counter with j/k flip-flops you just created would reset to seven (111)?

Which of the following is not contained on the slide show toolbar? a. next button b. slide button c. close button d. pen tool

You need to design a circuit that implements the functions in the following table: s0 s1 function0 0 a + 10 1 a – b1 0 a + b1 1 a – 1s0 and s1 are 1-bit control inputs to select the function of the circuit. inputs a and b are 4-bitnumbers in 2s complement form. the output is also a 4-bit number in 2s complement form. you are allowed to use only one ttl 7483 4-bit adder to implement all the functions. but anynumber of other components (except the adder) can be used. hint: design a combinational logic circuit to modify the input b and the “carry input” of theadder depending on the control inputs s0 and s1.important: lab grade will depend on the working of the circuit & will be checked of by your labinstructor.1. is the output valid for the following input combinations: a. s0 = 0, s1 = 0, a = 7, b = 3? b. s0 = 0, s1 = 1, a = 7, b = 3? c. s0 = 1, s1 = 0, a = -4, b = -5? d. s0 = 1, s1 = 1, a = -8, b = 6? 2. what is the range of inputs (for both a and b) that will produce the valid output for all the functions?