Ryder has discovered the power of creating and viewing multiple workbooks. ryder wants to use a layout in which the workbooks overlap each other with all the title bars visible. ryder opens all of the workbooks, and then he clicks the view tab on the ribbon and clicks the arrange all button. what should he do next to obtain the desired layout?

Write a program in plp assembly that counts up by one starting from zero (or one) inside a loop and writes this value to the leds every time the value is increased. the memory address of the leds is 0xf0200000. the table below shows the meaning and an example usage of the instructions covered in the video, plp instructions for project 1. instruction example usage meaning load immediate li $t0, 8 register $t0 is set to the value, 8. store word sw $t2, 0($t1) the value in register $t1 is used as the memory address. the value in register $t2 is copied into this memory address. add addiu $t4, $t3, 29 register $t4 is assigned the sum of 29 and the value in register $t3. jump j your_label_name the program jumps to the line following the label, "your_label_name: ". label your label name: defines a label called "your_label_name: " that can be jumped to

This might be a bit off-topic, but i'm having trouble with a certain arg made by game theory. if there are any theorists out there that wanna , it would be appreciated!

The piston ring isn't a completely solid ring; instead, it's usually split at one point. this split or gap in the ring is called the a. ring spacing. b. ring clearance. c. ring end gap. d. ring side clearance.