While driving after a heavy rain you drive through some deep water if your car starts pulling to one side when use your brakes you may have

Can you resubmit the question?

Further explanation

Of course, to stop the speed of the car safely is not enough with the condition of the tires are still good, there are special techniques that must be known. Here's the trick:

1. Drum brakes. If your car is still using this type of stall, proceed at a reasonable speed. Not too slow (due to danger with the car behind) and not too tight. The drum and brake shoes when wet the performance decreases, especially those that are worn out, the possibility of "slipping" when braking is quite large. Not to mention the potentially sticky canvas because the asbestos layer that expands when exposed to water.

2. Slip / slip. This incident can happen to anyone despite being careful. If you experience this, do not panic and step on the brakes forcefully, because the brakes will lock (if there is no ABS) and the car is increasingly difficult to control. Do braking with reasonable pressure, while the steering wheel is controlled to get back on track.

3. Aquaplanning. The car actually drove on water, did not contact with the asphalt alias did not get traction at all. This requires tires that really grip, if it does not meet that specification, try to drive on the path left by the car in front of you.

4. Blong. If suddenly on the wet road, your car's brakes don't grip, or don't work, even though you need to stop immediately, do the "shuffle" as soon as possible. If it still does not stop, reduce gears slowly if your car has a manual transmission. Use handbrake slowly, do not immediately pull it fully so that it does not bounce.

Learn  More

brakes :

Details

Class: midde school

Subject: Computers and Technology

Keywords : Drum brakes, slip, aquaplanning, blong

ok that sounds like a app that my brother would like