Asign is to be hung from the end of a thin pole, and the pole supported by a single cable. your design firm brainstorms the six scenarios shown below. in scenarios a, b, and d, the cable is attached halfway between the midpoint and end of the pole. in c, the cable is attached to the mid-point of the pole. in e and f, the cable is attached to the end of the pole.

Suppose a router has built up the routing table shown in the table. subnet number 128.96.39.00 28.96.39.128 128.96.40.00 192.4.153.0 default) subnet mask 255.255.255.128 255.255.255.128 255.255.255.128 255.255.255.192 nexthop interface 0 interface 1 r2 r3 r4. the router can deliver packets directly over interfaces 0 and 1, or it can forward packets to routers r2, r3, or r4. describe what the router does with a packet addressed to each of the following destinations: (a) 128.96.39.10 (b) 128.96.40.12 (c) 128.96.40.151 (d) 192.4.153.17 (e) 192.4.153.90