Two pieces of the same metal are placed on a table. The pieces of metal have the same density, mass, and texture. Which characteristic must be the ONLY difference
between the two samples?

F. They have different dimensions.

G. They have different boiling points.

H. They are made up of a different type of matter.

I. They contain a different amount of matter per unit volume.

(With Explanation)

1. the question asks the most appropriate, which seems to rule out "all of the above." your choice appears to be the correct one.

2. the protocol described is good for identifying correlation, but not cause and effect. for cause/effect, you need to devise a protocol that will assign the treatment (or not) to groups that have essentially the same "demographics" with respect to all the other variables. your choice regarding control group seems appropriate. random assignment of treatment (choice d) may be appropriate also. (i think you can argue that b and d are just different descriptions of the same method.)

3. d will randomize the birds, but may not guarantee there are 10 in each group. e will do both, so seems the better choice.

comment on question 2

based on the problem statement, it seems clear that confident, attentive drivers are more likely to use daytime running lights. so, the protocol might need to be devised in such a way that the lights would be turned on or off without the driver's knowledge. (an attentive driver will figure it out.) assigning a confident, attentive driver to a group required to drive without running lights might mess with his/her confidence and attentiveness. you don't want your experiment to do that. (nor do you want the experiment to subject a driver to greater risk of accident as a consequence of driving without running lights.) experiments involving human safety are always problematic.

answer: semi-infinite solid initially at a uniform temperature of 400 ◦c is cooled at its surface by convection. the cooling fluid at a constant temperature of 200 ◦c has a convective coefficient (ha) of 250 w/m2.k. the physical properties of the solid: k = 20 w/m.k and α = 4 * 10-5  m2/s. using δx = 0.04 m and δt = 10 s. write the finite difference equations describing the transient heat transfer of the first five δx and the temperature profile after 30 s.

use quiz let it tells you all the answers thats what i use