1. Cathodic protection of iron involves using another more reactive metal as a sacrificial anode. Classify each of the following metals by whether they would or would not act as a sacrificial anode to iron under standard conditions. a. Ag
b. Mg
c. Cu
d. Pb
e. Sn
f. Zn
g. Au
1. Will act as sacrificial anode for iron
2. Will not act as sacrificial anode for iron
2. An old iron beam was coated with an unknown metal. There is a crack on the coating and it is observed that the iron is rusting at the fracture. The beam is in a structure that experiences high stress, resulting in frequent fractures to the coating. What was the old metal coating likely made of and what metal you would use to repair the fractures to avoid further corrosion? Drag each label to the appropriate target.
a. gold
b. aluminum
c. tin
1. The old coating was likely made of.
2. Would be a good choice for repairing the fracture.

Need on both questionswill markbr />

Since the gas in your graduated cylinder is a mixture of butane and water vapor, you must determine the partial pressure of the butane, pbutane, alone. to do this, consult a reference and record the partial pressure of the water vapor, pwater, at the temperature you recorded. use the following formula to compute the partial pressure of the butane. pbutane = atmosphere - pwater use the following combined gas law formula and compute the volume that the butane sample will occupy at stp. (hint: convert both temperatures to kelvin.) pbutane x voriginal = pstandard x vfinal troom tstandard use the following ratio and proportion formula to determine the mass of butane needed to occupy a volume of 22.4 l at stp. grams of butane you used “x” grams of butane ml of butane corrected to stp = 22,400 ml compute the theoretical molar mass of butane based on its formula and the atomic masses on the periodic table. compare your experimental results from #3 to the theoretical value of #4, computing a percent error of your findings using this formula: % error = measured value - accepted value x 100 accepted value use the following ratio and proportion formula to determine the mass of butane needed to occupy a volume of 22.4 l at stp. need asap

If a molecule with a molecular formula of c13h18 is treated with an excess of h2 in the presence of finally divided pt metal under conditions required for maximum hydrogenation of the molecule to give a molecule with a formula c13h24, how many rings are in the molecule?