A student wants to make 50-mL of a 0.6 mg/L solution of acetic acid. She will be making the solution by diluting a stock with a concentration of 2.0 mg/L. Put the steps for her dilution in order. 4. Cap the flask and invert several times to mix. 2. Fill the volumetric flask with deionized water until the meniscus touches the mark. 6. Swirl the flask to mix the contents. 1. Obtain a 50-mL volumetric flask. 3. Use a pipet to add the appropriate volume of stock solution to the flask. 2. Add approximately 10 mL of deionized water to the empty flask.

The steps in order are;

1. Obtain a 50-mL volumetric flask

2. Add approximately 10 mL of deionized water to the empty flask

3. Use a pipet to add the appropriate volume of stock solution to the flask

4. Cap the flask and invert several times to mix

5. Fill the volumetric flask with deionized water until the meniscus touches the mark

6. Swirl the flask to mix the contents

The volume of the acetic acid to be added to the solution is 15 mL

Explanation:

The given steps are;

4. Cap the flask and invert several times to mix

5. Fill the volumetric flask with deionized water until the meniscus touches the mark

6. Swirl the flask to mix the contents

1. Obtain a 50-mL volumetric flask

3. Use a pipet to add the appropriate volume of stock solution to the flask

2. Add approximately 10 mL of deionized water to the empty flask

The given parameters are;

The volume of the volumetric flask = 50-mL

The concentration of the final solution of acetic acid = 0.6 mg/L

The concentration of the stock solution = 2.0 mg/L

Let 'x' represent the volume of the stock solution added, we have;

2.0 mg/L·x + (50 - x)×0 = 0.6 mg/L × 50-mL

x = 0.6 mg/L × 50-mL/(2.0 mg/L) = 15 mL

The volume of the stock solution to be added, x = 15 mL

well in order to answer this question you have to provide more information < 3

answer : one can design an experiment using a liquid and an additive that can be added to the liquid and observe the chemical changes in the reaction species.

one would need a beaker which is filled with a known amount of the liquid in which thermometer is placed to measure the temperature changes; after addition of the additive to the liquid solution one can note down the temperature change and find whether the reaction is endothermic or exothermic in nature. by subtracting the initial temperature value with the final temperature one can find the temperature changes.

various combinations of liquid and additive can be used. liquid in this case can be a known quantity of water and additives can be epsom salt or without epsom salt the experiment can be conducted to notice the changes. water and ice, hydrogen peroxide and dry yeast, vinegar and baking soda,etc.