To run a spectrophotometry experiment, begin by the spectrophotometer and preparing the samples. Be sure to select the correct , then run a measurement on the solution. Follow up by running measurements on solutions. Once data is collected, turn off the instrument, clean the area, and discard the samples.

To run a spectrophotometry experiment, begin by warming up the spectrophotometer and preparing the samples. Be sure to select the correct wavelength, then run a measurement on the blank solution. Follow up by running measurements on sample solutions. Once data is collected, turn off the instrument, clean the area, and discard the samples.

Explanation:

The spectrophotometer is a device used in laboratories to carry out analysis in experiments that need to measure and compare the amount of light absorbed or transmitted between samples, regardless of whether the samples are transparent or opaque solid. The spectrophotometer can be single-beam and double-beam. Regardless of the nature of the beam, to perform a spectrophotometry experiment, you must start by heating the spectrophotometer and preparing the samples. Make sure to select the correct wavelength and perform a measurement on the blank solution. Follow up by performing measurements on sample solutions. Once the data is collected, turn off the instrument, clean the area and discard the samples.

organisms are more likely to be more preserved in mud than sand because mud is moist and wet, while sand is very dry.