What is the reason for analyzing a blank in the spectrophotometer before analyzing the standard solution? A. any absorbance of light by the solvent AND the cuvette needs to be accounted for B. any absorbance of light by the cuvetto needs to be accounted for C. so the scattered light is filtered before reaching the photodiode D. to account for any fingerprints on the cuvette E. any absorbance of light by the cuvette and fingerprints needs to be accounted for

A.  any absorbance of light by the solvent AND the cuvette needs to be accounted for

Explanation:

Blank calibrations are usually carried out on the spectrometer to eliminate and account for any readings that would come from absorptions of the curvette, solvents/reagents or anything that is not the main analyte we are testing for.

Hence the blank solution does not contain the analyte itself. Fingerprints should be removed from the curvette as practice. Hence the most suitable answer amongst the options is A.

I hope this was clear ad most of all, helpful.

when [oh-] is 10-5  m, and [h3o+] is 10-9  m, the poh is 5 and ph is 9. again in both cases the sum of ph and poh is 14. however, the hydrogen ion concentration is not always going to be equal to exactly 1 x 10 raised to a negative number. for example, we skipped over the value of 2.0 x 10-7.