Use the materials to build prototypes for your two bumpers. Tape a bumper to the box so the ball will hit it properly. Set the box at the foot of the ramp so the bumper is touching the ramp. Then run the test and take measurements using the setup from task 1. Switch bumpers and run the second test. Perform three trials for each test, and record the data in the table. Find the average of the measurements to get a final reading. (For both bumper prototypes, subtract two inches from the average because the bumper changes the starting location of the box by two inches.)

part 1: the half-life of the element is 22 years.

part 2: it will take 132.02 year for the sample to decay from 308.0 g to 4.8125 g.

explanation:

part 1: there are two ways to determine the half life time.

first way: the half life time can be determined directly from its definition as it is the time required for the sample to decay to its half concentration.

from the data the initial concentration was 45.0 g and decayed to its half value (22.5 g) in 22.0 years.

second way: the radio active decay is considered first order reaction so we can use the laws of first order reactions.

k = (1/t) ln (a/a-x), where k is the rate constant of the reaction,

t is the time of the reaction

a is the initial concentration of the reactant

a-x is the remaining concentration at time (t)

a = 45.0 g the initial concentration at t = 0 year.

at t = 22 year, a-x = 22.5 g

then k = (1/22 year) ln (45.0 g/ 22.5 g) = 0.0315 year-1.

the half-life time (t1/2) = ln 2/ k = 0.693/ k =0.693/ 0.0315 = 22 years.

part 2:

using the same law k = (1/t) ln (a/a-x),

using the given data; a = 308.0 g and a-x = 4.8125 g and the calculated k from the part 1 (k = 0.0315 year-1)

t = (1/k) ln (a/a-x) = (1/0.0315) ln (308.0/ 4.8125) = 132.02 years

away from the curb

explanation:

the wheels would then hit the curb if it started to rolling, decreasing the chance of an accident.

the answer would be a