Experimental Design Practice: Design a lab in which you have a mixture of sand, salt, iron, and poppy seeds and you must separate them all out into individual beakers. You will type up a procedure that will explain all of the steps needed to separate these individual components. Here's an example of a sample procedure: If I had a mixture of sugar and sand that I needed to separate a possible procedure could be the following:

1. Place the mixture into a 100 mL beaker.

2. Add 50 mL of water. (This will dissolve the sugar)

3. Then pour the mixture through a coffee filter or filter paper. (This will trap the sand)

4. Heat the remaining water mixture to evaporate the water and leave the sugar behind.

You should include at least one image or diagram in your procedure.

> b takes place in the gas phase in an isothermal tubular reactor. the feed is one mole of a per one mole of c, an inert. the entering temperature and pressure are 427°c and 10 atm, respectively. the gas constant r = 0.08206 atm · l/mol · k.

(newtons first law)

conservation of momentum law states :

momentum before collision = momentum after collision

momentum p (kg-m/s)= mass * velocity

say moving car=1 000 kg, velocity = 10 m/s then p = 1 000*10= 10 000 kg-m/s

say still car = 2 000 kg, velocity = 0 m/s then p = 2 000* 0 = 0 kg-m/s

total momentum prior to collision = 10 000 + 0 = 10 000 kg-m/s

momentum after collision = 10 000 kg-m/s

mass now = 1 000 kg+2 000 kg = 3 000 kg

10 000 = 3 000 kg* velocity m/s

10 000/3 000 = velocity

3.33 m/s = velocity after collision

an impulse is a force applied over time , momentum is exclusive of external forces and a perfect collision is implied

on passing the small ampere of electric current through the tube made of ar and hg of cfl generates uv rays which excites the fluorescent and thus emits the high radiation by consumption of just 5- 12 w in comparison to incandescent light which requires more power such as around 40 - 55 w to lighten.

moreover the life span of fluorescent or cfl is around 8000 h whereas the life span of incandescent is around 1200 h

hence, the building installed with incandescent lights bears more electricity bill.