You are asked to consider a cheaper, lower-performance version of this processor, by removing some of the FP hardware to reduce the die size. The wafer has a diameter of 10 cm, costs $1,000, and has a defect rate of 2/(cm2). This wafer has a 75% yield. The current chip has a die size of 12 mm2. The new chip becomes 10mm2, and FP instructions will now take 13 cycles to execute.

1. alwaysrain irrigation, inc. would like to determine capacity requirements for the next four years. currently, two production lines are in place for making bronze and plastic sprinklers. three types of sprinklers are available in both bronze and plastic: 90-degree nozzle sprinklers, 180-degree nozzle sprinklers, and 360-degree nozzle sprinklers. management has forecast demand for the next four years as follows: both production lines can produce all the different types of nozzles. the bronze machines needed for the bronze sprinklers require two operators and can produce up to 12,000 sprinklers. the plastic injection molding machine needed for the plastic sprinklers requires four operators and can produce up to 200,000 sprinklers. three bronze machines and only one injection molding machine are available. what are the capacity requirements for the next four years? (assume that there is no learning.)