Engineering, 05.10.2019 13:30, itzygutierrez2763
Circular aluminum fins of constant rectangular profile are attached to a tube of outside diameter d = 5 cm. the fins have thickness t = 2 mm, height l = 15 mm, thermal conductivity k = 200 w/(m • °c), and spacing 8 mm (that is, 125 fins per 1-m tube length). the tube surface is maintained at a uniform temperature t0 = 200°c, and the fins dissipate heat by convection into the ambient air at to, = 30°c with a heat transfer coefficient h^ = 50w/(m2oc). determine the net heat transfer per 1-m length of tube.
Answers: 2
Engineering, 04.07.2019 18:10, abdirahmansoloman
Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?
Answers: 1
Engineering, 04.07.2019 18:10, mamasbug4285
An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0
Answers: 3
Engineering, 04.07.2019 18:10, 0436500
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Circular aluminum fins of constant rectangular profile are attached to a tube of outside diameter d...
Mathematics, 10.12.2019 05:31
Mathematics, 10.12.2019 05:31
Mathematics, 10.12.2019 05:31
Mathematics, 10.12.2019 05:31
History, 10.12.2019 05:31